The links.3d-print.today is a page which can be loaded into your browser with the help of adware (sometimes called ‘ad-supported’ software). The ad-supported software may modify the settings of web browsers such as Google Chrome, Firefox, IE and Edge or install a harmful browser extension, which created to generate a huge number of unwanted advertisements. It’ll lead to the fact that when you run the browser or surfing the Internet, it will always be forced to show links.3d-print.today popup ads, even when your web-browser is configured to stop pop-up ads or your computer has a application that stops pop-up ads. On current date, the ‘ad supported’ software continues to increase the number of computers that have been infected.
The ad-supported software usually affects only the Google Chrome, Firefox, Edge and IE by changing the web browser’s settings or installing a harmful extensions (addons). Moreover, possible situations, when any other internet browsers will be affected too. The ‘ad supported’ software will perform a scan of the personal computer for web-browser shortcuts and modify them without your permission. When it infects the web browser shortcuts, it’ll add the argument such as ‘http://site.address’ into Target property. So, each time you open the browser, you will see an annoying links.3d-print.today site.
While your personal computer is infected with the adware, the Google Chrome, Firefox, IE and MS Edge may be redirected to links.3d-print.today annoying web-page. Of course, the ‘ad supported’ software may not cause damages to your files or Windows system, but it may show lots of unwanted ads. These ads will be injected within the content of web sites that are you opening in your browser and can be varied: pop-up ads, in-text ads, different sized banners, offers to install an questionable software. The advertisements will appear on all pages, including sites where previously you have never seen any advertising banners. In this case, when you open any site, you may see in your internet browser’s status bar the following messages: ‘Waiting for links.3d-print.today’, ‘Transferring data from links.3d-print.today’, ‘Looking up links.3d-print.today’, ‘Read links.3d-print.today’, ‘Connected to links.3d-print.today’.
So, obviously, you need to get rid of the ‘ad supported’ software ASAP. Use the free few simple steps below. This guide will help you clean your computer and thereby get rid of the links.3d-print.today annoying ads.
How can you prevent the links.3d-print.today pop-up ads
Just as the beginning of this post, if you have ever seen the links.3d-print.today site appear in your browser, it means your personal computer has been infected with the ‘ad supported’ software. Most often ad supported software is bundled with free software. So, think back, have you ever download and start any free software? Because most users, in the Setup Wizard, simply press the Next button and do not read any information such as ‘Terms of use’ and ‘Software license’. This leads to the fact that the machine is infected, the browser’s configured to show a huge number of the links.3d-print.today annoying advertisements. Even removing the freeware that contains this ‘ad supported’ software, the annoying ads does not disappear. Therefore, you must follow the few simple steps below to clean your machine from the ‘ad supported’ software and thereby remove links.3d-print.today redirect.
How to manually remove links.3d-print.today redirect
The simple answer is right here on this page. We have put together simplicity and efficiency. It will assist you easily to clean your PC of adware. Moreover, you can choose manual or automatic removal method. If you are familiar with the machine then use manual removal, otherwise use the free anti-malware tool designed specifically to remove adware that causes unwanted links.3d-print.today pop-ups. Of course, you can combine both methods. Read this manual carefully, bookmark or print it, because you may need to close your browser or restart your computer.
- Remove suspicious and unknown software by using Windows Control Panel
- Get rid of links.3d-print.today redirect from FF
- Remove links.3d-print.today pop-up ads from Google Chrome
- Delete links.3d-print.today pop-up ads from IE
- Disinfect the browser’s shortcuts to remove links.3d-print.today redirect
- Delete unwanted Scheduled Tasks
Remove suspicious and unknown software by using Windows Control Panel
Press Windows key 
, then click Search 
. Type “Control panel”and press Enter. If you using Windows XP or Windows 7, then click “Start” and select “Control Panel”. It will open the Windows Control Panel as on the image below.
Next, click “Uninstall a program” 
It’ll show a list of all applications. Scroll through the all list and remove any suspicious and unknown software.
Get rid of links.3d-print.today redirect from FF
First, start the FF. Next, click the button in the form of three horizontal stripes (
). It will open the drop-down menu. Next, click the “Help” button (
).
In the Help menu, press the “Troubleshooting Information”. In the upper-right corner of the “Troubleshooting Information” page, click “Refresh Firefox” button.
Confirm your action, click the “Refresh Firefox”.
Remove links.3d-print.today pop-up ads from Google Chrome
Reset Google Chrome settings is a simple way to remove the malicious and ad-supported extensions, as well as to restore the web-browser’s startpage, new tab page and default search engine that have been replaced by adware.
- Open the Google Chrome, then press the Menu icon (icon in the form of three horizontal stripes).
- It will open the Chrome main menu. Click the “Settings” menu.
- Next, click the “Show advanced settings” link, which located at the bottom of the Settings page.
- Further, click the “Reset settings” button, which located at the bottom of the Advanced settings page.
- The Chrome will display the reset settings prompt as shown on the image above.
- Confirm the web browser’s reset by clicking on the “Reset” button.
- To learn more, look the blog post How to reset Chrome settings to default.
Delete links.3d-print.today pop-up ads from IE
To get rid of the links.3d-print.today pop-up ads you need to reset the IE to the state, that was when the Windows was installed on your personal computer.
First, start the Internet Explorer, then press ‘gear’ icon 
. It will show the drop-down menu on the right part of the web-browser, then click the “Internet Options” as shown on the screen below.
In the “Internet Options” screen, you need to select the “Advanced” tab and click the “Reset” button. The Microsoft Internet Explorer will show the “Reset Internet Explorer settings” prompt as shown on the screen below. Next, click the “Delete personal settings” check box to select it. After that, click the “Reset” button.
When the process is done, click “Close” button. Close the Microsoft Internet Explorer and restart your PC system for the changes to take effect. This step will help you to restore your web-browser’s settings to default state and disable ‘ad-supported’ extensions.
Disinfect the browser’s shortcuts to remove links.3d-print.today redirect
Once the adware is started, it can also change the web browser’s shortcuts, adding an argument like “http://site.address” into the Target field. Due to this, every time you start the web browser, it will be redirected to an annoying ads.
To clear the web-browser shortcut, right-click to it and select Properties. On the Shortcut tab, locate the Target field. Click inside, you will see a vertical line – arrow pointer, move it (using -> arrow key on your keyboard) to the right as possible. You will see a text which begins with “http://” that has been added here. You need to remove it.
When the argument is removed, click the OK button. You need to clean all shortcuts of all your browsers, as they may be infected too.
Delete unwanted Scheduled Tasks
If the unwanted links.3d-print.today web-site opens automatically on Windows startup or at equal time intervals, then you need to check the Task Scheduler Library and remove all the tasks that have been created by ‘ad-supported’ programs.
Press Windows and R keys on the keyboard together. This shows a prompt that called Run. In the text field, type “taskschd.msc” (without the quotes) and click OK. Task Scheduler window opens. In the left-hand side, press “Task Scheduler Library”, as on the image below.
Task scheduler
In the middle part you will see a list of installed tasks. Select the first task, its properties will be show just below automatically. Next, press the Actions tab. Pay attention to that it launches on your PC. Found something like “explorer.exe http://site.address” or “chrome.exe http://site.address”, then you need delete it. If you are not sure that executes the task, check it through a search engine. If it is a component of the adware, then this task also should be removed.
Having defined the task that you want to remove, then click on it with the right mouse button and select Delete as shown below.
Delete a task
Repeat this step, if you have found a few tasks that have been created by malicious program. Once is finished, close the Task Scheduler window.
Remove links.3d-print.today pop-up ads automatically
You can delete links.3d-print.today pop-up ads automatically with a help of Malwarebytes Free. We recommend this free malware removal utility because it can easily delete adware, browser hijackers, potentially unwanted applications and toolbars with all their components such as files, folders and registry entries.
Download Malwarebytes Free on your computer from the link below. Save it on your Desktop.
317570 downloads
Author: Malwarebytes
Category: Security tools
Update: April 15, 2020
After downloading is complete, close all windows on your machine. Further, run the file named mb3-setup. If the “User Account Control” prompt pops up as on the image below, press the Yes button.
It will display the “Setup wizard” that will assist you install Malwarebytes on the PC system. Follow the prompts and do not make any changes to default settings.
Once the setup is complete successfully, press Finish button. Then Malwarebytes will automatically start and you can see its main window as shown in the figure below.
Next, click the “Scan Now” button to begin scanning your computer for the malware and adware which cause the links.3d-print.today ads. When a threat is found, the number of the detected objects will change accordingly. Wait until the the checking is finished. Please be patient.
Once the scanning is complete, you can check all threats detected on your system. Make sure all entries have “checkmark” and click “Quarantine Selected” button.
The Malwarebytes will start removing malware and ad supported software that cause links.3d-print.today pop-ups. Once the disinfection is finished, you may be prompted to restart your personal computer. I recommend you look at the following video, which completely explains the procedure of using the Malwarebytes to remove ad-supported software and other malicious programs.
Stop links.3d-print.today pop-up ads and other annoying web sites
To increase your security and protect your PC against new unwanted ads and malicious sites, you need to use program that blocks access to dangerous advertisements and web sites. Moreover, the program can block the display of intrusive advertising, that also leads to faster loading of web-sites and reduce the consumption of web traffic.
Download AdGuard program by clicking on the following link.
25653 downloads
Version: 6.4
Author: © Adguard
Category: Security tools
Update: November 15, 2018
Once downloading is finished, start the file named adguardInstaller. You will see the “Setup Wizard” screen as shown on the screen below.
Follow the prompts. When the installation is complete, you will see a window as shown on the screen below.
You can press “Skip” to close the setup application and use the default settings, or press “Get Started” button to see an quick tutorial that will allow you get to know AdGuard better.
In most cases, the default settings are enough and you do not need to change anything. Each time, when you start your computer, AdGuard will start automatically and stop ads, web-pages such as links.3d-print.today, as well as other dangerous or misleading web-sites. For an overview of all the features of the program, or to change its settings you can simply double-click on the AdGuard icon, that is located on your Windows desktop.
If the problem with links.3d-print.today pop-ups is still remained
If MalwareBytes cannot get rid of links.3d-print.today pop-up ads, then we suggests to use the AdwCleaner. AdwCleaner is a free removal tool for adware, browser hijackers, PUPs, toolbars.
- Download AdwCleaner by clicking on the link below.
AdwCleaner download
220725 downloads
Version: 8.3.2
Author: Xplode, MalwareBytes
Category: Security tools
Update: April 28, 2022
- Double click the AdwCleaner icon. Once the tool is opened the main screen will appear as shown on the image above.
- Now, press the “Scan” button to begin checking your machine for the adware which generates links.3d-print.today ads.
- When the system scan is finished, AdwCleaner will open a scan report. Review the report and then click “Clean” button. It will show a prompt, click “OK” button.
The following video explains the guide above on how to remove adware with AdwCleaner.
Finish words
After completing the instructions outlined above, your computer should be clean from malware and ad-supported software. The Chrome, Mozilla Firefox, Microsoft Internet Explorer and Edge will no longer show links.3d-print.today annoying ads and redirect you to unknown web pages. Unfortunately, if the few simple steps does not help you, then you have caught a new type of adware, and then the best way – ask for help.
- Download HijackThis from the link below and save it to your Desktop.
HijackThis download
4164 downloads
Version: 2.0.5
Author: OpenSource
Category: Security tools
Update: November 7, 2015
- Double-click on the HijackThis icon. Next click “Do a system scan only” button.
- When it has finished scanning, the scan button will read “Save log”, click it. Save this log to your desktop.
- Create a Myantispyware account here. Once you’ve registered, check your e-mail for a confirmation link, and confirm your account. After that, login.
- Copy and paste the contents of the HijackThis log into your post. If you are posting for the first time, please start a new thread by using the “New Topic” button in the Spyware Removal forum. When posting your HJT log, try to give us some details about your problems, so we can try to help you more accurately.
- Wait for one of our trained “Security Team” or Site Administrator to provide you with knowledgeable assistance tailored to your problem with the annoying links.3d-print.today ads.
